1. Before the digital white ink hot painting printer is turned on, observe whether there are items accumulated above and around the printer, do a good job of hygiene around the machine environment, check the supply of ink every day, and replace the ink in time when the ink is about to bottom, so as to avoid the air pumping into the ink tube.
2. After the end of daily work, the printer nozzle should be controlled to the original position after the printing machine is turned off, so as to avoid re-cleaning the nozzle when the next time it is turned on, a large amount of ink will be wasted, and the nozzle will be sealed by the protective cover in the original position, so that the nozzle is not easy to block, ensuring the service life of the nozzle and the machine, and saving a lot of ink supply costs and resource savings.
3. Turn off the power supply and network cable only after the digital white ink hot stamping printer equipment is completely turned off, otherwise it will seriously damage the print port and PC motherboard. Leads to unnecessary losses.
4. When using the machine to print, first check whether the two sides of the printing printer are parallel, whether it will cause uneven printing and cause waste.
5. Regularly check the ink pump, ink pad, ink cartridge of the white ink hot painting printer, if the ink pump does not rotate or the speed does not meet the demand for ink supply, the ink supply motor will continue to operate, if the ink cartridge is short of ink for a long time or the ink cartridge is in the state of ink supply for a long time, it must be replaced in time, check whether the ink pad is loose, and need to be fixed to protect the nozzle.
